Description

The Full Mercedes-Benz cars package includes the MN030, MN032 and MN033 licenses. Below you can see what each one of them covers as functionalities.

MN033 is dedicated to resolving a problem with the “ELV Component Fault” which is preventing the vehicle from being started and driven.
This is a common fault in the Electronic Steering Lock (ESL/ELV) modules. The MN033 enables you to clear the critical error which blocks the vehicle’s electronic steering lock.
This function is performed with a direct connection to the ELV diagnostic line. It can be executed direct in the vehicle or on bench!

Supported vehicles:

• ALL FBS4 vehicles with ESL/ELV modules!

The usage of the ZN051 ABRITES Distribution Box is recommended for this license.

MN032 is a world leader in terms of Mercedes-Benz vehicles module replacement, key and remote programming, both for new and used control units for all vehicles up to, and including FBS3 generation.

Supported Models:

• W202/W208/W210
• W203/W209/W211/W219
• W168/W245
• W220/W215/R230
• W204/W207/W212/W218
• W221/W216/W251/W164/X164
• W169/W246/W117
• W166/X166

Module replacement

• Service password reading
• Read/Save/Update FBS Data
• Transfer FBS Data to a replacement unit
• Make each DAS/FBS module virgin, personalise and activate it
• Read/Save/Update Coding (the only way to avoid online SCN coding)
• Transfer Coding to a replacement unit

Supported Modules are all DAS related modules

• ECUs
• TCUs (7G-Tronic)
• ISM
• DSM
• ESL/EZS
• EIS/ELV

Key programming:

• Easily extract the EZS/EIS key password
• Program Infra Red keys to DAS2/DAS3 (FBS2/FBS3)
• Enable and disable key positions

Other features:

• Program the Abrites Emulators for Mercedes vehicles (EM001, EM004, EM005, EM008, EM009, EM012, EM014)
• Reset the mileage of any supported EZS/EIS.

 

FBS4 cars

 

• Reset of FBS4 Engine control units to virgin state
• Read the personalization data from a FBS4 ECU and saving it to a file for future use
• Program personalization data from a previously saved file to a FBS4 ECU
• FBS4 ECU Activation

Currently supported ECUs (produced until MY2020):

• CR40 (EDC17C43)
• CR41 (EDC17C66)
• CR42 (EDC17CP46)
• CR43 (EDC17CP60)
• CR6 (EDC17CP10)
• CR60 (EDC17CP46)
• CR61 (EDC17CP57)
• MED40 (MED17.7.1 and MED17.7.2)
• MED177 (MED17.7.3, MED17.7.5, MED17.7.8)
• CRD3
• CRD3H
• CRD3S2

 

VGS-NAG2 FBS4 Transmission control units are also supported for renewal.

Additional and required tools:

• ZN051 Abrites Distribution Box
• ZN002 Abrites PROTAG programmer
• ZN030 Abrites ABPROG

Abrites IR keys, keys with replica shells and Abrites IR PCBs: TA13, TA14, TA15, TA21, TA22, TA52

The MN030 is the latest development dedicated to odometer calibration and module replacement by OBDII for dashboards of FBS4 vehicles equipped with IC213 or IC222 dashboard

Main functionalities:

• Blocks synchronisation between the Instrument Cluster and the EZS (for models with IC213)
• Allows successful mileage calibration
• Allows modules replacement (dashboard) – Make virgin and Adapt

Different retrofit options like update from analogue to digital dials

Supported models:

• W213
• W205
• W222
• W217
• W238
• W253
• W257
• W463
• W447 (with IC213)
• related models

Models with dashboard IC222 (require emulator*)

*EM008/EM009/EM014 is used for w205 and w222 (both before facelift)

An AVDI interface with a valid AMS subscription are required for the purchase and use of this package.